Rasmi Products:Customer Specifics:Hitachi:FP 100   FP 100 Range   The FP-100 range, especially for Hitachi L100 and SJ100 Series inverters. Help to ensure EMC compliance of machinery and installations using L100 and SJ100 drives. Footprint filters mount between the inverter and the panel, saving valuable space inside wiring cabinets. All filters are designed and manufactured to UL requirements and are CE marked.   Applied L100 Inverter Applied SJ100 Inverter Filter Part No Rated Current Max Rated Voltage Leakage Current Nom/Max External L x W x H (mm) Mount Dims X x Y (mm) Inverter Fixing Price (£) L100 002 NFE L100 004 NFE SJ100 002 NFE SJ100 004 NFE SJ100 005 NFE FP 1007 100 6A 1ph, 250V 3.5mA 156x83x30 146x60 2XM4 L100 005 NFE L100 007 NFE SJ100 007 NFE SJ100 011 NFE FP 1012 100 10A 1ph, 250V 3.5mA 166x114x30 156x80 4XM4 L100 011 NFE L100 015 NFE L100 022 NFE SJ100 015 NFE SJ100 022 NFE FP 1024 100 23A 1ph, 250V 3.5mA 220x146x35 210x100 4XM5 L100 004 HFE L100 007 HFE L100 015 HFE SJ100 004 HFE SJ100 007 HFE SJ100 015 HFE SJ100 022 HFE FP 3007 100 6A 3ph, 480V 0.5 / 14mA 166x114x35 156x80 4xM4 L100 022 HFE L100 030 HFE L100 040 HFE SJ100 030 HFE SJ100 040 HFE FP 3012 100 10A 3ph, 480V 0.5 / 14mA 220x146x35 210x100 4xM5 L100 055 HFE L100 075 HFE SJ100 055 HFE SJ100 075 HFE FP 3022 100 22A 3ph, 480V 0.5 / 38mA 305x186x50 289x140 4xM6   Earth Leakage Measurements In single phase applications, the earth leakage current is present all of the time. For three phase applications under normal conditions with the three phases balanced, earth leakage currents are extremely small - the max values stated are worst possible values such as would occur momentarily during switch on or failure of one or two phases.     Typical Circuit Schematic     Single Phase Three Phase     Rasmi Products:Customer Specifics:Hitachi:FP 100