The MM4 range, especially for Siemens MicroMaster Series inverters. Help to ensure EMC compliance of machinery and installations using MicroMaster 420, 430 and 440 Series three phase drives. Footprint filters mount between the inverter and the panel, saving valuable space inside wiring cabinets. All filters are designed and manufatured to UL requirements and are CE marked.

Applied MM420 Inverter 6SE6420-2U	Applied MM430 Inverter 6SE6430-2U	Applied MM440 Inverter 6SE6440-2U	Filter Part No	Rated Current	Max Rated Voltage	Leakage Current Nom / Max	External L x W x H (mm)	Mount Dims X x Y (mm)	Inverter Fixing	Price (£)
C11-2AA0 C12-5AA0 C13-7AA0 C15-5AA0 C17-5AA0		C11-2AA1 C12-5AA1 C13-7AA1 C15-5AA1 C17-5AA1	RF 3006-MM4	6A	3ph, 250V	0.1/7mA	200x73x40	187x56	2xM4
C21-1BA0 C21-5BA0 C22-2BA0		C21-1BA1 C21-5BA1 C22-2BA1	RF 3015-MM4	15A	3ph,250V	0.5/40mA	213x149x40	200x120	4xM4
C23-0CA0 C24-0CA0 C25-5CA0		C23-0CA1 C24-0CA1 C25-5CA1(CT)	RF 3023-MM4	23A	3ph,250V	0.5/40mA	245x195x50	232x156	4xM4
		C25-5CA1(VT)	RF 3035-MM4	35A	3ph, 250V	0.5/40mA	245x195x50	232x156	4xM4

RF-MM4 380-480V Three Phase Range

Applied MM420 Inverter 6SE6420-2U	Applied MM430 Inverter 6SE6430-2U	Applied MM440 Inverter 6SE6440-2U	Filter Part No	Rated Current	Max Rated Voltage	Leakage Current Nom / Max	External L x W x H (mm)	Mount Dims X x Y (mm)	Inverter Fixing	Price (£)
D13-7AA0 D15-5AA0 D17-5AA0 D21-1AA0 D21-5AA0		D13-7AA1 D15-5AA1 D17-5AA1 D21-1AA1 D21-5AA1	RF 3006-MM4	6A	3ph, 480V	0.1/7mA	200x73x40	187x56	2xM4
D22-2BA0 D23-0BA0 D24-0BA0		D22-2BA1 D23-0BA1 D24-0BA1	RF 3015-MM4	15A	3ph,480V	0.5/40mA	213x149x40	200x120	4xM4
D25-5CA0 D27-5CA0 D31-1CA0	D27-5CA0 D31-1CA0	D25-5CA1 D27-5CA1 D31-1CA1(CT)	RF 3023-MM4	23A	3ph,480V	0.5/40mA	245x195x50	232x156	4xM4
	D31-5CA0	D31-1CA1(VT)	RF 3035-MM4	35A	3ph, 480V	0.5/40mA	245x195x50	232x156	4xM4

 

UL approval documentation and EMC Test Certificates from Independent Test House.

Filter Installation Notes
To conform to EMC directives, it is essential that good wiring practice is observed and that all installation recommendations are followed.

• The usual safety procedures when working with electrical equipment must be followed and all electrical connections to the filter, inverter & motor must be made by a qualified electrical technician.
• Filters should be fitted as closely as possible to the incoming mains supply of the wiring enclosure, usually directly after the enclosures circuit breaker or supply switch.
• Care should be taken to remove any paint etc. from filter and inverter mounting holes and face area of the panel to ensure the best possible earthing of the units.
• All lead lengths should be kept as short as possible and incoming mains, outgoing motor cables and control cables should be kept well separated. Cable earth screens should only be stripped back as far as necessary to make
  connections - screens should be securely earth bonded to the wiring panel.

Rasmi Products:Customer Specifics:Siemens:RF-MM4